How to restore the capacity of the laptop battery

This recovery method I use the conclusions of the two new x-series battery. Greater credibility.

This method requires you to know that this time you are ready to carry out before the restoration of the capacity your battery had several charge and discharge. I said before the one I used the example of the following:

I have about two weeks did not go to full charge and discharge, two weeks probably done the battery used about 50%, but did not reach 10%. There was another a few times 95% is automatically charged. So, on the

Have the possibility of increase in battery capacity after a full charge and discharge, and this possibility is 90%. If you do this to restore more than 4,5 times less than 50% of the charge and discharge, the battery capacity but [reduce] the possibility of

At 90%.

Specific approach: your battery in whatever form, began to discharge the battery before approaching the previous 6%, that is to say, 8%, 9% are. Ibm's own power management and then to open, view battery information

status Detail, which is being displayed to change current whz per second is decreasing, but when the the capacity flag dropped 6% point, you will find that suddenly this whz is not change, but what did other voltage change and

And the original 8% to 7% of the time may be as long as two minutes can be, but the 6% was good and did not move for a long time. My generally 7-8 minutes later, the 6% suddenly becomes 5% of your total battery capacity (full value) 1
Mobile power pack, Mobile Power Station, USB battery pack, portable mobile power

A whz to ranging from 2 whz. After that, you are willing to no longer important whether the battery capacity to use light, does not make any sense.

Note: If your battery has repeatedly charge and discharge times, you began to do an experiment, is likely the result of the significant decline in battery capacity. But may rise in the future recovery. However, the battery capacity must With

Using the general trend of decline.

Very important one is: we must: start to discharge the battery before approaching the previous 6%, that is to say, 8%, 9% are. Then open ibm power management comes to view the status of the battery information

Detail. This program must be in the current state of the display. Eyes is certain to be able to see him in constant change. If you just run in the background regardless of use. I have been experimentally confirmed.

I dare say so, because I have to do my first new x series battery 40-50 times the experimental discovery rule. Of course, after I find an excuse to go to this much I tortured battery the blue fast replacing the. Now

With the new for a x battery. I use this method maintenance. But I suggest that if you are a new user, do not use this method. I recommend this method to the battery capacity has dropped to about 37, 38 of the user, this means to them

More. For those who have more than 40whz user, I really think there is no need to do this experiment. Because in high impossible to more than 42, 43. Moreover, the battery charge and discharge each will definitely lead to decreased capacity, this approach also

Recovery can be done only in a short period of time, but the total time curve, the battery is to take the decline line.

Yo the Haloxylon lot, meaning that I hope you understand this and then decide whether hands. To save ruining the battery.